引起重庆升降平台油温过高的原因很多，归纳起来主要有以下两点。There are many reasons causing high temperature Chongqing lifting platform, summed up in the following two points.
1.设计不当。包括重庆升降平台系统中没有卸荷回路；油箱储油量太小，致使油液循环太快，冷却器冷却作用差，且高负荷 长时工作；液压元件选用不当、管路设计不合理及运动元件机械摩擦产生的热量等。Improper design. Including Chongqing lifting platform in the system without unloading circuit; the oil tank is too small, resulting in oil cycle too fast, the cooler cooling effect is poor, and the high load working for long time; the improper selection of hydraulic components, piping design unreasonable and mechanical motion components of friction heat.
2.使用不当。包括误用粘度太大的油液，引起液压损失过大；液压系统混入空气，磨粒、杂质等被吸附在过滤器的滤芯上；液压油箱内油位过低；重庆升降平台液压油冷却循环系统工作环境温度过高等。Improper use. Including the misuse of oil viscosity is too large, causing the hydraulic loss is too large; the air mixed with the hydraulic system, abrasive and other impurities are adsorbed on the filter cartridge; the hydraulic oil in the oil level is too low; Chongqing lifting platform hydraulic oil cooling system working environment temperature is too high.
全国服务热线
